Description

KJB Security Products GPS935 USB Female to Bare End Hard-Wired Power Cable for iTrail Solo GPS900/GPS910

This cable and USB port will connect to your car’s 12V power.The KJB Security Products GPS935 designed for use with iTrail Solo GPS900 and GPS910.Designed as a power source for iTrail Solo GPS 900 (CDMA) and iTrail Solo GPS910 (Global GSM) this cable can also be used with any USB powered device that draws under 2 to 3 amps.

This device features 3 LEDs:

The Green LED represents GPS connectivity The Blue LED represents Cellular connectivity.The Yellow LED represents OBD/Ignition status

First-Time Setup: When plugging in the iTrail Snap into the OBD-II port of your car, the Green light will glow solid for about 1 minute. The Blue light will then light up and blink every 3 seconds. After that, the Green light will begin to blink everysecond.

GPS Indicator – Green Light: The Green light will stay solid until a GPS connection is made. When a connection is made to GPS satellites, the Green light will start to blink every second, indicating a proper connection.

Cellular Indicator – Blue Light: When the Snap is looking for a cellular signal, the Blue LED will blink once every second. When a connection is made through the cellular network, the Blue LED will start to blink once every 3 seconds.

OBD Indicator – Yellow Light: The Yellow LED will indicate the status of the ignition. When the ignition is turned off there will be no light.

Additional information