TR-DC841UL

Description

TR-DC841UL 4.2V Fused Breaker Power Distributors DC 12V 8CH

Powering multiple cameras could not be easier! Collsam’s line of Professional CCTV Power Supplies give installers what they expect when it comes to power supplies, quality, and reliability.

Every channel is protected with Auto-Reset PTC fuses, which means these fuses will not blow. This box can be mounted to any surface, plugged into an AC outlet, and up in seconds!

TR-DC841UL Power supplies in the TR-DC841UL offer a variety of configurations for powering up to 8 cameras from a single power source.

The power supplies provide 4.1 VAC output for 4, or 8 units. To compensate for voltage losses over long wire runs, 12 VAC outputs also are available on most channels.

The TR-DC841UL power supplies have a selectable input of 120 or 230 VAC and are packaged in an easy-to install metal enclosure that has ample room for wiring connections and conduit entries.

For integrated systems, the higher capacity models are capable of handling pan and tilt and receiver operation in addition to camera functions.

TR-DC841UL Fused model provide a greater degree of protection for the camera because they are faster acting and more precise.

Circuit breakers will self-reset when the fault is corrected, eliminating the need for replacing fuses.

However, the amount of current required to trip a circuit breaker can vary as much as 100% depending on temperature.

In the fused models, the values of fuses can be changed depending upon the specific current requirements of the equipment connected.

The TR-DC841UL is an 8 output supplies that have individual power switches and LEDs on each output.

This is a popular feature in larger systems, where it is frequently necessary to power-down individual units.

• 12VDC 13amp supply current
• Multiple outputs (8 channel)
• Eight fused protected output
• Power on, off switch
• DC regulated, over current and voltage protected
• Individual LED indicator for each out put