EX-100W

Description

The EX-100W camera mount extension adds 100 mm of space to a compatible camera mount. This EX-100W extension bracket is an ENS Titanium mounting accessory. Also, it helps move a camera away from a wall or other surface. This extra space can make room for the camera, cable, or nearby building parts. The exact model is EX-100W.

Use this surveillance camera bracket extension only with parts that fit the planned system. Check the camera, mount, screws, and wall before work starts. The mounting surface must hold the full installed load. Therefore, measure the site as well. Make sure a 100 mm change gives the camera the view and space that the job needs.

This ENS Titanium mounting accessory supports a clean and direct mounting plan. It can help when the normal mount position is too close to a wall, ceiling, or other part of the site. The fixed length also helps crews plan the final camera position. Clear plans can reduce changes during setup and keep each part aligned.

Install the surveillance camera bracket extension with the correct hardware for the site. Tighten every joint as directed for the camera and mount. Then check the full assembly. It should be firm, straight, and stable. Do not mix parts unless their fit has been checked. A final safety check should confirm that the camera stays secure.

Collsam Security supplies the EX-100W extension bracket for jobs that need added mounting space. This NDAA-compliant part fits projects that require verified compliance. Its simple shape and stated length make it easy to identify before work begins. It is a focused part for professional use. Choose the EX-100W camera mount extension when a tested system needs a 100 mm camera bracket spacer.